Home
Environmental plasticizer
产品中心
Environmental plasticizer (ZN-100)
Main ingredients: chlorinated methoxy fatty acid ester
Average molecular weight: 390-410
Physical and chemical index:
Index I II Appearance colorless, transparent liquid Density (20°C, g/cm3) 0.98-1.02 1.08-1.12 Loss on heat (125°C, 2hrs) % ≤0.30 ≤0.50 Freezing point °C(min) -30 -30 Flash point°C(min) 180 180 Viscosity(25°C), mPa.s 20-40 40-60 Ester (%) ≥ 99 99 Performance and characteristics:
The product contains diester structure, excellent toughness, mobility is small; good compatibility with PVC resin, good heat resistance, weather resistance and gloss, and has good flame resistance and electrical insulation is an anti. burning, non-toxic, Environment-friendly composite type plasticizer.
The product does not contain harmful heavy metals and low-carbon-chain chlorinated paraffins, phthalates and other aromatic type substance; through third-party testing organization SGS testing and certification, twelve kinds of harmful substances were not detected, in line with EU export requirements.
Uses and usage advice:
Applicable to toys, PVC rain gear, PVC hose, PVC fire-retardant conveyor belt, automotive interior leather, cable, artificial leather, plastic runway and sealing tape and other industries; also be used for chloroprene rubber, styrene-butadiene rubber, nitrile rubber some rubber and other products; Also in the mix is also extensive use of polyurethane, the effect is obvious.
Suggested dosage (with DOP plasticizer): CH-100I plasticizer can replace DOP 40-60%; CH-100II plasticizer can replace DOP 60-80%, more in other products.
(Note: do experiement before use).
Storage Packing: metal pail or plastic drum, Net wt 200kg /drum; Storage and the conditions of transport: Under the condition of room temperature, kept in ventilated, dry, and dark place, according to the transport of dangerous goods.
Environmental plasticizer (ZN-200)
Main ingredients: chlorinated fatty acid ester
Average molecular weight: 550-590
Technical indexes:
Index Range Chroma (Pt-Co), # 150 Density (50°C), g/cm3 1.15-1.25 Loss on heat (125°C, 2hrs)% ≤0.30 Freezing point °C(min) -25 Flash point°C(min) 180 Viscosity(25°C), mPa.s 100-250 Performance and characteristics:
1, excellent plasticizing effect, with respect to the proportion of 40-60% can be replaced plasticizerDOP, chlorinated paraffin performance than -52.
2, flame-retardant effect is obvious, this product has a rubber material can be effectively enhanced flame retardancy.
3, non-aromatic constituents, Environment-friendly, non-toxic, non-polluting, renewable and biodegradable characteristics.
4, excluding low-carbon-chain chlorinated paraffins and harmful heavy metal, after Shanghai SGS certified third-party testing organizations, twelve kinds of harmful substances were not detected, in line with EU export requirements.
5, the products have internal and external lubrication double performance, product excellent gloss and improved sticky roll phenomenon.
6, excellent antistatic properties.
Use and recommend methods of use:
Applicable to toys, PVC rain gear, PVC hose, cable aggregates, leather, plastics and other industries sealing tape;
Suitable for paper additives and coatings, polyurethane foam auxiliary plasticizer and other industries use, etc;
This product's use can take reference of chlorinated paraffin, the amount needs to be adjusted according to customer's actual recipe testing.
Storage Packing:
metal pail or plastic drum, Net wt 200kg /drum; Storage Under the condition of room temperature, kept in ventilated, dry, and dark place, according to the transport of dangerous goods.
Environmental plasticizer (ZN-600)
Main ingredients: per-chlorinated methoxy fatty acid ester (Average molecular weight1060-1100)
Specification Index:
Name Index Range Appearance white, powdery Chlorine (%) 68-72 Specific gravity g/cm3 1.6-1.7 Moisture (%) ≤0.15 Softening point °C(min) 100-120 Particle size (20mesh sieve) all pass Carbon tetrachloride (%) Not Detected Performance and characteristics:
white or light yellow resin-like powder, Insoluble in water and lower alcohols, soluble in mineral oil, aromatics, chlorinated hydrocarbons, ether, acetone, esters; anti-oxidants, pH and so on; good chemical stability, excellent flame resistance, chemical resistance, aging resistance and thermal stability. is a comprehensive add excellent flame retardant.
With the majority of synthetic and natural materials have good compatibility, at temperatures up to 170 ° C above the start trace degradation, de-chlorinated hydrogen to generate olefins and other substances.
Uses and usage advice:
The product is additive flame retardant and has good flame persistence; and both moisture-proof, anti-static, anti-softening, anti-compression, low volatility; good electrical insulation properties, lubricated and non-slip characteristics of both, toughening thickening, anti-radiation, and waterproof, pest control and anti-corrosion.
This product is recommended to mix with Sb2O3, may form a highly efficient flame retardant widely used in polyvinyl chloride, polyethylene, polystyrene and other resins and various rubber products, flame retardants; can also be used to reconcile fire retardant paint, fire retardant paint, for industrial lubricants extreme pressure anti-wear additives, used in printing inks to improve ink gloss and abrasion resistance, in addition to suitable timber corrosion, decay and paper industry sizing, etc. is a versatile fine chemical products.
Storage Packing:
Packing: plastic film lined PP woven bag; Net wt: 40kgStorage and the conditions of transport: kept in ventilated, dry, and dark place, according to the transport of dangerous goods.